Showing posts with label thrifty. Show all posts
Showing posts with label thrifty. Show all posts

Sunday 22 September 2013

oven mitt tutorial

This week I have been trying out a new pattern for me and making some oven mitts/pot holders.  It was all a bit of an experiment to be honest but I did a very wonky test run - got positive feedback so thought I would run a few up to sit on the table at an upcoming craft fair.

I got myself completely organised and set up a little production line so that I would - in theory - be super duper time efficient.  Unfortunately I wasn't as organised as I had thought and only had enough wadding for my test run and 2 more mitts.  So I did that many and will have to return to make the others later.  I'm proud of my good intentions but may have to work a bit harder on the pre-planning bit :)

If your going to do this project you will need

thread, patterned fabric, plain backing fabric, wadding, shape templates (can be printed out from internet), scissors, bias binding that compliments your patterned fabric and some pins.  I think this one is easier if you have a sewing machine but certainly doable without!

So this is how I did it:

I printed out templates of the shapes I had chosen - heart, star and flower onto plain paper.  I only have an A4 printer so made the shapes into halves and printed it this way.  I laid the straight edge onto the fold in the fabric, pinned and cut out.


I then repeated this step for backing fabric and wadding.  I then cut the backing fabric out a second time but this time cut the shapes in half along the fold line.

I laid the fabric in the order I wanted baking fabric then wadding and then pattered fabric and ironed. This is an important step as it causes the wadding to compress which makes it much easier to manage when sewing and cutting a fiddly shape.

Then take the two halves of the backing fabric and edge the straight seam.  I did this by over locking it and then folding over and running a straight line stitch along it.  When you do this ensure that you fold over on both halves the same side.  When you lay the two halves onto the back of your shape you should see no raw edges on either side.

Now pin together and run a straight line stitch all the way around the edge of your shape trying to ensure you catch all the layers into your stitch.

Once you have done this trim with scissors as close as you can to your line of stitching.  Remove any excess threads or pieces of wadding that are sticking out around the edges.

Now take your bias binding and fold around your shape.  This is the trickiest bit and requires you to take it slowly and ensure the binding is tucked tightly around the shape.

It should look something like this now.


As you can see I added a loop of fabric to the corner of each so that the mit could be hung up in the kitchen.  The idea of these is that they fold in half and your hand slips into the pockets.
 Trim all your edges and check carefully for if there are any sections of bias binding that you have missed with your line of stitching.  If there are you need to neaten that section up otherwise the mit will begin to look untidy very quickly when used.

So there you have it - a cute mit for handling those hot pots and pans.  I think it would brighten up a kitchen but is also a cute idea for a gift.

I found that the flower became very tricky because of the tight curves so I kept sewing the bias binding without all of the layers in it when I hit the corners.  I'll keep trying but didn't end up with a neat enough product to photograph this time.  Maybe next week!

As always I have made these out of reclaimed fabrics so they are ethical and environmentally friendly.

Happy stitching :) 


ps. it was lovely to climb up into my organized craft room this weekend so I have many good intentions to become an organised crafter - watch this space :) 



Thursday 8 August 2013

Back to the blog - how to make EYE MASKS

After a few weeks away with sickness and all sorts going on I thought on this gorgeously sunny morning I would complete a project and do some blogging.
 I recently signed up to do a craft fair for the first time.  It's all a bit of an experiment to be honest but it has got me thinking of new things that I can make that people would enjoy owning or giving as gifts.  This morning I made an eye mask which was surprisingly simple, reasonably quick and gives a good professional finish which is always very satisfying.

To do this project you will need:

  • Fabric in the pattern of your choice
  • A sheet of thin foam ( I used craft foam for kids)
  • A backing fabric
  • Paper for the stencil, pencil and scissors
  • Pins
  • Elastic
  • Bias binding
  • The usual needle and thread :)
You need to cut out your template - I traced an eye mask I already had but a quick look in google images will give you a selection to print and trace if you aren't confident with your free hand. 
Now pin the template onto the fabric and cut around as you would with any pattern.  Repeat this on your foam and your backing fabric.
Place all three together - backing fabric then foam then your patterned fabric on top facing right side upwards.  Now pin together to avoid movement and sew around the edge.  It helps to stay close to the edge so you aren't going to have a hard time hiding the stitching later.
You should be left with something like this.


Now take your bias binding and elastic.  You need to mark with a pin where you want your elastic to sit on either side of the mask.  It needs to be placed at an equal distance on both sides from the top and the bottom to ensure you don't end up with a wonky mask.
 Begin to fold the bias binding round the edge of the mask and pin in place.  As you reach the points for your elastic insert the elastic into the fold at the back of the mask.  The elastic should just lie flat against the mask.


 Now you need to choose a thread that matches the bias binding or choose an appropriate contrast.  You now need to sew round the edge of the bias binding adjusting as you go to avoid any creases.  At this point it is worth going slow and steady and staying close to the edge of the binding.  This line of stitching will show and makes part of the finished product so it is important the stitching is neat and steady.

Now trim any loose threads and there you have it - a perfect gift for yourself or someone else!  Enjoy and don't forget to send me pics of your progress - you can tweet me @jenniwessels




Till next time :) 


Monday 8 July 2013

Presents - home made? ? ?

Summer for me brings a spattering of birthdays and celebrations.  Being in the middle of this time again got me to thinking about presents.  Most people love giving and receiving a good gift - it truly warms the heart to realise someone has considered what you would love and who you are.  At the same time there is something wonderful about watching a friend or family member get that feeling after opening something you gave.

I've been thinking about what really makes a great gift - is it having something you really wanted or is it knowing that someone put in some time to make or choose that gift rather than grabbing it at the end of a weekly food shop?

One of the best gifts my parents got me was my sewing machine - 15years old I think and over a decade later it's still with me!  They knew I would love it - I think I actually asked for one - and it has truly been a useful gift :-).  At the same time other much smaller gifts have left great impressions on me - knowing that person really knows me well.

A few years ago I was flat broke and started making presents.  I wanted to still be able to give things but really couldn't afford great shop bought gifts.  I have to admit that some of my early attempts at gifts have probably been discarded at the back of a cupboard somewhere.  I like to think that my home made gifts have improved in their quality but the heart intention is still the same- to make that individual aware that I have been thinking of them and how special they are.  Home made presents do have the risk of being useless and tacky- things you would actually never pay money for.
Spending a bit more money and heading to the shops doesn't of course guarantee you won't be still giving something useless and tacky but the risk is probably reduced somewhat!

All that considered I think my moto now is if I'm inspired to make something then that's what I go with - if not I head to the shops and hope I find some inspiration there.  I am trying not to automatically make everything for the sake of it instead trying to maintain some authenticity to my crafting.

So what do you prefer to give/receive?

Is it home made or shop bought?

Let me know :-)